High Quality 100W Monocrystalline Solar Panel Kit - German SolarWorld Cells + USB Charging - Mounts & Dual Entry Gland
1.5M Pre-Made Charge Cable with Waterproof Inline Fuse - Fast Install
High Quality 100W Monocrystalline Solar Panel Kit with 'Industry Leading' Quality and Power Output & 5 Year Panel Quality Warranty. German Solarworld Solar Cells

The panels are multi use, they are small enough to be mobile for caravan or mobile home use or can be permanently mounted
on a garage roof or other suitable surface.
One of these 100W Solar Kits can be used to charge up a 12V Battery and 2 x USB devices through the included 10A Charge Controller and PV Cables.

 Easy to setup and install with the highest quality components.
Please see pictures for example setup (the small battery is for demo purpose only, any size 12V can be charged)
100W Monocrystalline TUV Certified Solar Panel
Panel Features:
Industry Leading Warranty - Quality Warranty 5 Years, 90% Power Output @ 10 Years, 80% Power Output @ 25 Years.
Frame - Anodized Aluminium Alloy
Front Glass - 3.2mm,High Transmission, Low Iron,Tempered Glass
Cell Type - Monocrystalline 125x125mm (5 inch)
Junction Box - IP65 Rated
Output Cable - TUV 1x4.0mm2/UL12AWG,Length: 90cm
Dimensions - 945x670x30mm
Weight - 7kg
Reverse Current Protection - Blocking Diodes x 2
Electrical Specification:
Maximum Power - 100W
Optimum Power Voltage (Vmp) - 17.8
Optimum Operating Current (Imp) - 5.62
Open Circuit Voltage (Voc) - 22.30
Short Circuit Current (Isc) - 6.07
Cell Efficiency (%) - 18.43

Temperature & Coefficients:
Operating Temperature(°C): -40°C ~  +   85°C
Maximum System Voltage: 1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax:  -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operating Cell Temperature (NOCT):  47+/-2°C
10A Solar Charge Controller PWM 1224V Auto Detect + USB Charging Ports x 2
Charge Controller Features:
This sophisticated solar charge controller family for low cost applications.
The electronic circuit is equipped with a microcontroller that provides high-efficiency
charging technology together with a number of outstanding status display, warning
and Safety functions.
Fully Automatic operation with electronic protection, detection of Day and night.
Specifications:
LCD Display for up to the minute charging information.
2 x USB Charging Ports 5V @ 3A
PWM-regulation (series type)
Boost,Equalize and Float charging.
Automatic 12/24 Volt detection
Integrated temperature compensation
Large terminals for ease of installation.
SOC and voltage controlled LVD
Fully electronically protected
Power Consumption <10mA

These Solar Charge controllers are an ideal way to get your Solar System charging your battery bank in a controlled manner thus protecting and extending your battery life.
2 x 5M 4mm TUV Rated PV Cable Incl. MC4 Connectors (One of each)

2 X 5M Solar PV Cables come pre-crimped with One Male and One Female Connector, these cables are perfect for connecting from a Solar Panel to a charge controller or inverter where only one set of MC4 Connectors is required. If you require both ends of the cable crimped please see our other items.
PV Cable Features:
TUV Approved Solar Cable
Ozone Resistant to EN50396
UV Resistant to UNE-HD:2008(HD605/A1)
Durability Tested to last 25 Years according to EN 60216
TUV 2 PfG 1169/08.2007
CEI 20-91
Flame Resistant: IEC 60332-1-2
Conductor: Class 5 Flexible Tinned copper to IEC 60228
Temperature Range: -40C to +90C
Minimum Bending Radius: 4 x Diameter
Thermal Endurance: IEC 60216-
Maximum Voltage 1000V
30A Max Current
Operating Temperature -40C - +90C
Waterproof Grade: IP67
Flame class: UL94-V0
Connector Materials: Nickel Copper
Insulation Material: PA12/1988HB
TUV Certified
Water Weatherproof Rubber Seal
High Quality Machined Copper Sealed Tip
Easy Disconnect Clips No tool required

Charge Cable Features:
Size: 2.5mm Sq (14 AWG) Single Core 50/0.25 (50 Copper Strands) / 0.25mm)
Length: 1.5 Meter Each, + & -
Operating Temperature: -40C to 105C
Current Rating: 30Amps
Voltage Rating: 12v/24v/50v/110v/230v/415v/600v (600v rms)
Weight: 34g/m
Insulation Type: Standard PVC Hard
Outside Diameter: 3.65mm
Insulation Thickness: 0.8mm
Minimum Bending Radius: 6x Diameter
Approval: BS6231 UK, CSA TEW Canada, UL Style 1015, 1028 or 1283 USA
RRP £425
Our Price £275
Fitted £350
Corner Mount Features:
External Size: 150x150x60mm
Internal Size: 90x90x35mm
Durable Palstic
Drill hole locations
These High Quality Solar PV Cables and connectors will ensure minimum loss and maximum lifetime reliability for your Solar Array.